Uszkodzony pendrive czy da się go ratować?

[bischop 0]

Pożyczyłem koledze pendrive. Po powrocie pendrive nie jest widoczny w Windows w ogóle, pod linux'em w dmsg widać, że nie da się odczytać co najmniej tablicy partycji. W związku z czym nie jest on widoczny. GParted w ogóle nie wykrywa napędu.

Da się z tym coś jeszcze zrobić czy raczej śmietnik?

[  850.418278] usb 1-2: new high-speed USB device number 3 using ehci-pci
[  850.764724] usb 1-2: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
[  850.764726] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  850.764727] usb 1-2: Product: TransMemory
[  850.764728] usb 1-2: Manufacturer: TOSHIBA
[  850.764729] usb 1-2: SerialNumber: 60A44C429BA6EF2130007D60
[  850.764992] usb-storage 1-2:1.0: USB Mass Storage device detected
[  850.765127] scsi host6: usb-storage 1-2:1.0
[  851.866261] scsi 6:0:0:0: Direct-Access     TOSHIBA  TransMemory      PMAP PQ: 0 ANSI: 6
[  851.866533] sd 6:0:0:0: Attached scsi generic sg4 type 0
[  852.439439] sd 6:0:0:0: [sdd] 60995328 512-byte logical blocks: (31.2 GB/29.1 GiB)
[  852.440059] sd 6:0:0:0: [sdd] Write Protect is on
[  852.440060] sd 6:0:0:0: [sdd] Mode Sense: 23 00 80 00
[  852.440681] sd 6:0:0:0: [sdd] No Caching mode page found
[  852.440756] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[  852.465047] sd 6:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  852.465050] sd 6:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current] 
[  852.465052] sd 6:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
[  852.465054] sd 6:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 08 00 00 08 00
[  852.465056] blk_update_request: I/O error, dev sdd, sector 8 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  852.465188] Buffer I/O error on dev sdd, logical block 1, async page read
[  852.465288] Dev sdd: unable to read RDB block 8
[  852.466920] sd 6:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  852.466922] sd 6:0:0:0: [sdd] tag#0 Sense Key : Not Ready [current] 
[  852.466923] sd 6:0:0:0: [sdd] tag#0 Add. Sense: Medium not present
[  852.466925] sd 6:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 18 00 00 08 00
[  852.466927] blk_update_request: I/O error, dev sdd, sector 24 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[  852.467059] Buffer I/O error on dev sdd, logical block 3, async page read
[  852.467164]  sdd: unable to read partition table
[  852.468935] sd 6:0:0:0: [sdd] Attached SCSI removable disk

 

[Qwinto 413]

Jeśli nie chcesz odzyskiwać danych to elektro śmietnik.